Table of Contents
Advertisement
Chapter 3
Installation Procedures
Figure 29: Wrapping the Cable with Rubber-splicing or Self-amalgamating Tape
3.
For UV protection of the rubber splicing tape, wrap two layers of electrical tape on top of the rubber splicing
tape.
Figure 30: Wrapping the Connector with Electrical Tape
4.
Work mastic putty or duct sealing putty between the connector and the body of the radio or antenna. Ensure
the putty fills any gaps not covered by the tape.
32
RUGGEDCOM WIN7000
Installation Guide
Weatherproofing Cable Connections
Advertisement
Table of Contents
