RUGGEDCOM WIN7000
Installation Guide
Supplied Cable
GND
Section 3.4.7
Grounding the Device
To ground the device, do the following:
Procedure: Grounding the Device
1.
Assemble the ground connection as shown:
Figure 16: Ground Cable Assembly
1. Ground Stud
2.
Using a 1/4" square drive socket, torque the nut to 8.5 N·m (75 lbf-in).
Section 3.4.8
Installing the GPS Antenna
To install the GPS antenna, do the following:
Procedure: Installing the GPS Antenna
1.
Mount the GPS antenna as shown in
Grounding the Device
2. Flatwasher
3. External Tooth Lockwasher
Figure
Power Supply
+48VDC/ GND
1
4. 10 AWG Isolated Ring
17.
Installation Procedures
Note
Connect +48V and GND
2
3
4
3
2
6
5. Nut
6. 10 AWG Ground Wire
Chapter 3
5
21