Adjusting The Transparency Of The Aerial Map View; Exporting A Network Representation File - Cisco FM1200 Installation And Configuration Manual

Adjusting the transparency of the aerial map view

You can adjust the transparency level of the aerial map view. This is a
useful way to increase the visual definition of device icons, tooltips and
link lines against strong background colors.
To adjust the transparency of the current aerial map view, do the steps
that follow:
1. Click the Edit Mode icon on the upper right part of the FM-
QUADRO view (below).
Alternatively, enter Edit mode by clicking the Settings icon on the
upper right part of the FM-QUADRO view, and clicking the Edit
Mode switch in the Appearance / Background dialog from Off to
On.
• The Edit mode dialog will be shown.
2. Click the Continue to Edit Mode button to enable Edit Mode.
• An Edit Mode: ON notification will appear in the view.
• The Devices | Background switch control will appear in
the view.
3. Click the switch to Background.
4. Click-and-drag the Adjust background transparency slider to the
position that gives a comfortable level of visual contrast between
the network representation and the uploaded map view.
5. When the visual contrast is correct, click the Save changes
button.
• The Save new layout dialog will be shown.
6. To save your changes, click the Save changes button.
Alternatively, click the Keep editing button to return to Edit Mode,
or click the Discard button to leave Edit Mode without saving any
changes.

Exporting a network representation file

You can export a representation file of the current network layout. This
allows Cisco
troubleshooting purposes.
To export a representation file for the current network, do the steps that
follow:
1. Click the Export as JSON icon on the upper right part of the FM-
QUADRO view (below).
© 2021 Cisco and/or its affiliates. All rights reserved.
Device configuration using the configurator interface
Technical Support to visualize the network
Page 88 of 175
for