Transferring Pictures To Your Computer - CONCORD 4330z Owner's Manual

Transferring Pictures to your Computer

1) Install the drivers on your computer by following the instructions con
tained in the User's Guide. Be sure that your camera is NOT connected
to the com puter while the installation is in process.
2) After the driver installation has been completed, connect the camera
to the computer using the USB cable provided in the camera box.
3) Turn the rotary dial to PC.
4) Turn the camera on by sliding and holding the Power button for a few
seconds. "USB" in the LCD indicates that the camera is properly con
nected. If "USB" does not appear in the LCD, check that the USB cable
is securely connected and the rotary dial is aligned between PC and
the line guide on the camera.
5) The first time you connect the camera to the computer, the Install
Hardware Device screen will appear. Click on Next throughout the
installation. At the prompt click on Finish to complete the installation.
6) An icon will automatically be created on your desktop.
7) Click on the "4330Z" Icon to view your images.
8) Select the pictures you would like to save to your computer by clicking
on the pictures while holding down the Shift key. A red border indi
cates the picture has been selected. Click on the Computer Icon (Save
to HD) to download your pictures. You can select the location to
which you would like to save your pictures.
Note: You may also use the Adobe Photo Editing software that comes
with your camera. Install the software on your computer insuring that
your camera is NOT connected to the computer while the installation is in
process. An icon will automatically be created on your desktop. After
connecting the camera to the computer, click on the Adobe icon and fol-
low the on screen directions.