CONCORD 4330z Owner's Manual page 70

4.1-megapixel digital camera (2272x1704 pixels)
Hide thumbs Also See for 4330z:
Table of Contents

Advertisement

Troubleshooting
Problem
Zoom playback does not
work.
All images are over or
underexposed.
Lens moves out, but
data monitor remains
blank, and camera does
not work.
Image fi le damaged.
Camera does not work
properly.
70
Cause
Was the picture taken with
digital zoom?
Did you use exposure
compensation?
Does the battery icon
blink?
Did you remove your CF
card while it was accessed
by the camera?
Remove the batteries and replace them. If the camera
malfunctioned while it was powered by AC, pull the plug
from the camera and reinsert it. Then switch the camera
on again.
If the camera cannot be switched off, a defective CF card is
the likely cause. In this case, format your CF card externally
in a PC after loading down its data onto the computer.
Remedy
Pictures taken with digital
zoom cannot be played back
in zoom mode.
Reset exposure compensa-
tion to zero.
(Display goes dead after
fi ve seconds.)
battery icon
blinks,
the display will go dead
after fi ve seconds, while
the lens moves out.
Replace the batteries.
Never remove your CF
card while the green focus
lamp is blinking slowly
after exposure (about
twice per second).
Page
26
38
18
If the
21

Advertisement

Table of Contents
loading

Table of Contents