CONCORD 4330z Frequently Asked Questions

Concord camera 4330z: frequently asked questions

Hide thumbs Also See for 4330z:

Download this manual

Concord Eye-Q 4330z

Can I take a picture without a Compact Flash card inserted in the Concord Eye-

Q 4330z?

Since this camera has no internal memory, you must insert a Compact Flash (CF)

card into the memory card slot to take pictures.

I cannot transfer my pictures to my computer. What should I do?

Follow the steps below before you download your pictures:

1.Make sure that your camera is NOT connected to the computer during the

installation process. Install the drivers from the Eye-Q 4330z software CD

completely by following the on-screen instruction.

2.Connect the camera to the PC via USB cable.

3.Set the camera to PC mode.

4.Turn on the camera by sliding and holding the Power button for a few seconds. The

USB icon on the LCD indicates that the camera is properly connected. If the USB

icon does not appear on the LCD, check that the USB cable is securely connected

and the rotary dial is aligned between the PC icon and the line guide on the camera.

My camera freezes. What should I do?

Please reset the camera by removing the batteries from the battery compartment and

then re-insert them into the battery compartment.

What type of memory card(s) can I use for my Concord camera?

This camera is compatible with a Compact Flash Card. Please use cards that have a

capacity of 16 MB or more. We recommend the use of internationally recognized

brands of memory cards for optimal performance.

Page 1 Follow the steps below before you download your pictures: 1.Make sure that your camera is NOT connected to the computer during the installation process. Install the drivers from the Eye-Q 4330z software CD completely by following the on-screen instruction. 2.Connect the camera to the PC via USB cable.
Page 2 Concord Eye-Q 4330z I'm not a good photographer and my images always come out blurry. What should I do? Follow the photography tips below for optimal image quality: 1) The camera did not have enough time to focus. This is a common occurrence in low light environments.

Eye-q 4330z