Checking Battery Power; Automatic Cutoff - CONCORD 4330z Owner's Manual

This is how it works:

Checking battery power

With batteries loaded, the
camera will automatically
check their status and
display it on the LCD
monitor.
lit
Full power.
lit
Declining battery power, but
the camera is fully opera-
tional.
If the display disappears,
followed by the battery icon
blinking for five seconds and
disappearing once more,
battery power is insufficient
for camera operation.
Replace all batteries by fresh
ones, or use the optional
power-supply unit.
This is how it looks:
Power supply
This is what it's for:
If the LCD monitor is blank,
replace all batteries and
make sure they are inserted
with their +/- poles properly
oriented.
If left unused for three
minutes, the camera will
automatically switch off to
save power. To resume
operation, press the power
switch.
If you wish, you may select
intervals of 1, 5, 10 or 30
minutes for automatic cutoff.
When the optional power-
supply unit is used or when
the camera is connected to a
PC, the cutoff interval is
always 30 minutes and
cannot be varied.
19