Table of Contents
Advertisement
Maintenance
The Separation Roller Assembly and the Feed Roller Assembly in your scanner are
designed to make document feeding smooth. After usage for a period of time, the
Separation Roller Assembly and Feed Roller Assembly may become worn, and a
problem such as document double-feed may occur. In this case, check either the
Separation Roller Assembly or the Feed Roller Assembly, and replace them if
needed. Follow the procedure below for replacement of the Separation Roller
Assembly and Feed Roller Assembly.
Replacing the Separation Roller Assembly
1. Open the scanner cover. Locate the Separation Roller Assembly at the top of
Scanner cover
2. Push down and then pull the cover lever to open the roller cover first. Hold
the inner side of the scanner cover.
both sides of the rollers to pull out the Separation Roller Assembly from its
compartment.
Roller cover
Separation roller assembly
Separation Roller Assembly
ArtixScan DI 2125c User's Manual
37
Advertisement
Table of Contents
