Quick Reference Guide - Clarion Ungo Pro Security SR1000 Owner's Manual

Clarion sr1000 cctv systems: product manual
Hide thumbs Also See for Ungo Pro Security SR1000:
Table of Contents

Advertisement

Arming
To arm, press
the parking lights will flash once.
Arming while driving
To arm the system while driving, press
is running. The system will chirp once and then once more to indicate that
the ignition is on.
Disarming
To disarm, press
flash twice.
Silence alarm without disarming
Press
disarm the security system, press again and the system will chirp 4 or 5 times
(reporting the trigger).
Disarming without a remote
Turn on the ignition. Press the override switch within 15 seconds. The system
should now disarm. If it does not, you may have waited too long, so turn the
ignition off and on and try again.
Silent Arm/Disarm
Pressing
tion chirp(s) for that one operation only.
Panic mode
Press
and the parking lights will flash for 30 seconds. To stop panic mode at any
time, press
To remote engine start the vehicle
Press
connected) and the vehicle will start and run for the programmed period of
time.
To disable the remote engine start system
To disable the remote engine start, move the shutdown toggle switch to the
OFF position.
Location of override switch_________________________________
Number of override switch pulses for disarming_______________
.

QUICK REFERENCE GUIDE

. When the system arms, you will hear a short chirp, and
. You will hear two chirps, and the parking lights will
on your remote and the siren will stop sounding. To completely
briefly before arming or disarming will eliminate the confirma-
for 2 seconds, and you will enter panic mode. The siren will sound
on the remote again.
twice within 3 seconds. The parking lights will turn on (if
on your remote while the vehicle
35

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents