Understanding Out-Of-Range Alerts - Cisco 7925G-EX User Manual

Icon Line or call state
BLF-monitored line is
idle
BLF-monitored line is
in-use
BLF-monitored line is
in Do Not Disturb state
BLF indicator is
unavailable for this line
Remote line in use
Call on hold
Call forward enabled
Authenticated call
Encrypted call
Idle Intercom line
One-way Intercom call The intercom line is sending or receiving one-way audio. See
Two-way Intercom call The recipient pressed the intercom line to activate two-way

Understanding Out-of-Range Alerts

Your system administrator can configure your phone to send you an audible alert (beep) when you are
out of range of the wireless network. When you hear the alert, the
phone screen.
When you are out of range of the wireless network, you cannot use the phone for features requiring a
wireless network connection, such as making and receiving calls.
If your system administrator enabled the out-of-range alert, depending on the configuration, you
might hear a beep only once, or every 10, 30, or 60 seconds until you are back within range of the
wireless network.
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G User Guide
Description
See Using BLF to Determine a Line State, page
See Using BLF to Determine a Line State, page
See Using BLF to Determine a Line State, page
See Using BLF to Determine a Line State, page
A shared line is in use remotely. See
page 60.
You have put this call on hold. See
page 42.
You have forwarded your primary line. See
to Another Number, page
See Tracing Suspicious Calls, page
See Tracing Suspicious Calls, page
The intercom line is not in use. See
Intercom Calls, page
Placing or Receiving Intercom Calls, page
audio with the caller. See
Calls, page 53.
An Overview of Your Phone
Using a Shared Line,
Using Hold and Resume,
46.
65.
65.
Placing or Receiving
53.
Placing or Receiving Intercom
(no signal) icon displays on the
63.
63.
63.
63.
Forwarding Calls
53.
33