Cisco Unified Wireless Ip Phone 7925G, 7925G-Ex, And 7926G User Guide - Cisco 7925G-EX User Manual

Cisco unified wireless ip phone
Hide thumbs Also See for 7925G-EX:
Table of Contents

Advertisement

Warning
Voice over IP (VoIP) service and the emergency calling service do not function if power
fails or is disrupted. After power is restored, you might have to reset or reconfigure
equipment to regain access to VoIP and the emergency calling service. In the USA, this
emergency number is 911. You need to be aware of the emergency number in your
country. Statement 361
Warning
The plug-socket combination on the battery charger must be accessible at all times
because it serves as the main disconnecting device. Statement 1019
Warning
The battery charger requires short-circuit (overcurrent) protection to be provided as part
of the building installation. Install only in accordance with national and local wiring
regulations. Statement 1045
Warning
Do not use the Cisco Unified Wireless IP phone 7925G and 7926G in hazardous
environments such as areas where high levels of explosive gas may be present. Check
with the site safety engineer before using any type of wireless device in such an area.
Warning
Do not charge the battery of Cisco Unified IP Wireless Phone 7925G, 7925G-EX, and 7926G
in potentially explosive environment.
Warning
Use CSA or ATEX qualified accessories with the Cisco Unified IP Wireless Phone
7925G-EX in potentially explosive environment.
Warning
Telephone receivers produce a magnetic field that can attract small magnetic objects
such as pins and staples. To avoid the possibility of injury, do not place the handset
where such objects may be picked up.
Battery Safety Notices
These battery safety notices apply to the batteries that are approved by the Cisco Unified Wireless IP
Phone 7925G manufacturer.

Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G User Guide

Getting Started
3

Advertisement

Table of Contents
loading

This manual is also suitable for:

7925g7926g

Table of Contents