Using The Push To Talk Service; Using The Barcode Scanner - Cisco 7925G-EX User Manual

Using the Push to Talk Service

The Push to Talk service provides immediate communication (similar to a two-way radio) with
members of your organization. Your system administrator must set up the Push to Talk service, and
then you must subscribe to the service.
If you want to... Then...
Access Push To See
Talk service CallManager 4.3 or later.
See
Unified Communications Manager Release 5.0 or later.
Use Push to Talk 1. Choose
service
2. Use the
Note

Using the Barcode Scanner

Your system administrator can configure the Cisco Unified Wireless IP Phone 7926G to scan 2D
barcodes using the scanning module on the top of the phone. The phone uses a Java MIDlet to use the
barcode date to display information such as pricing, location, and inventory information. Contact
your system administrator for information about using the barcode scanner.
The Cisco Unified Wireless IP Phone 7926G must be running firmware version 1.4(1) or later.
Note
68
Subscribing to Phone Services, page 95
Setting Up Phone Services on the Web, page 101
> Push to Talk (name can vary).
Push to Talk service is active when the
button to start and end a transmission depending on how your
service is configured. You can also use the Talk and Stop softkeys to toggle
between transmitting and listening.
Your system administrator will provide detailed information about how to use
your Push to Talk service.
for systems using Cisco Unified
for systems using Cisco
icon appears.