Cisco 7925G-EX User Manual page 81

Cisco unified wireless ip phone
Hide thumbs Also See for 7925G-EX:
Table of Contents

Advertisement

If you want to...
Enable/disable Bluetooth
on your phone
Scan for Bluetooth devices
Pair a Bluetooth headset
with the phone
Connect a Bluetooth
headset already paired (but
not connected) with the
phone
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G User Guide
Then...
1. Choose
2. Highlight Bluetooth and press Select.
3. Select Enable or Disable, then press Save.
If enabled, the Bluetooth enabled icon
icon disappears.
Note
Bluetooth must be enabled on the phone before you can perform
tasks such as scanning, pairing, and unpairing.
1. Choose
2. Press Scan. A list of devices appears.
Note
It may take a few seconds for the scan to complete.
3. To rescan for a device, press Rescan from Scan Results.
1. From the Scan Results list, select a Bluetooth headset and press
Pair.
2. When prompted, enter the Bluetooth Passkey, then press
(Select) or Options > OK.
Note
Obtain the Bluetooth Passkey from your Bluetooth device
documentation. Pairing must be completed within one minute or it
will fail.
3. If the pairing succeeds, the newly paired headset is added to the
Device List and becomes connected to the phone (if no prior
Bluetooth connection exists between another device and the
phone.) If a prior connection exists, first unpair or disconnect the
other device from the phone.
The Bluetooth device connected icon
checkmark appears next to the device name.
4. If the pairing fails, press Back to retry.
Do one of the following:
• Tap on the headset to send a connection request to the phone.
• Choose
highlight the headset, and press Options > Connect.
Using a Handset, Headset, and Speakerphone
> Phone Settings > Bluetooth.
> Phone Settings > Bluetooth > Device List.
> Phone Settings > Bluetooth > Device List,
appears. If disabled, the
is displayed, and a
71

Advertisement

Table of Contents
loading

This manual is also suitable for:

7925g7926g

Table of Contents