Using Mute - Cisco 7925G-EX User Manual

Cisco unified wireless ip phone
Hide thumbs Also See for 7925G-EX:
Table of Contents

Advertisement

If you want to...
Remove a call from
hold on a different line
Move a call on a shared
line to your wireless
phone or to your desk
phone
Tips
• Engaging the Hold feature typically generates music or a beeping tone for the person on hold.
• If you receive an alert for an incoming call and a reverting call at the same time, by default your
phone will shift the focus of the phone screen to display the incoming call. Your system
administrator can change this focus priority setting.
• If you use a shared line, Hold Reversion rings only on the phone that put the call on hold, not on
the other phones that share the line.
• Your system administrator determines the Hold Reversion alert duration.

Using Mute

With Mute enabled, you can hear other parties on a call, but they cannot hear you. You can use Mute
with the phone or a headset.
If you want to...
Toggle Mute on
Toggle Mute off
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G User Guide
Then...
1. Press
to change to another line.
2. Press Resume.
Note
If a single call is holding on this line, the call automatically resumes. If
another call is holding, scroll to the appropriate call and press Resume.
1. From the phone with the active call on the shared line, press Hold.
2. From your other phone with the shared line, press Resume.
Then...
During a call, press
at the top of the phone screen.
Press
. The
on left side of phone. The
icon disappears.
Basic Call Handling
icon appears
43

Advertisement

Table of Contents
loading

This manual is also suitable for:

7925g7926g

Table of Contents