Ptz Configuration; Configuring Basic Ptz Parameters - Honeywell HEIPTZ-2736-WI User Manual

User Manual of Explosion-Proof PTZ Camera

5.4 PTZ Configuration


On the event configuration page, click

Click the direction buttons to control the pan/tilt movements.

Click the zoom/iris/focus buttons to realize lens control.

The functions vary depending on different Explosion-Proof PTZ Camera models.

5.4.1 Configuring Basic PTZ Parameters

You can configure the basic PTZ parameters, including proportional pan, preset freezing, preset
speed, etc.
1. Enter the Basic Settings interface:
Configuration > PTZ > Basic Settings
2. Configure the following settings:
 Basic Parameters: Set the basic parameters of PTZ.

Proportional Pan: If you enable this function, the pan/tilt speeds change according to
the amount of zoom. When there is a large amount of zoom, the pan/tilt speed will be
slower for keeping the image from moving too fast on the live view image.

Preset Freezing: This function enables the live view to switch directly from one scene
to show the PTZ control panel or click
Figure 5-27 Basic Settings
53
to hide it.