Table of Contents
Advertisement
3.2.2 PTZ / Function
PTZ/Function/Preset
①
Preset No./Name/Delete
②
Save/Add/Clear
PTZ/Function/AutoPan
③
Tour No./Tour Name /
④
Start/Add
⑤
Preset / Duration
⑥
Save / Refresh
PTZ/Function/Autoscan
⑦
Scan No./Speed/Stop/Set
⑧
Left limit/Right limit
Description
Set preset No. It becomes valid after you set. /Set preset name. You can input a self-defined
preset name here. /Delete corresponding preset.
Save current preset setup./ Click it to add a new preset, use PTZ controls to move to a PTZ
position to set as the preset./ Clear all presets setup.
Description
Choose Tour No. from drop down list to set./ Set tour name. You can input a self-defined tour
name here.
Begin tour. / Click it to add a new tour.
Click Add button, you can add a new preset to the tour. The default preset value is 1. Double
click tour No, you can see a dropdown list for you to select. / It is to set the staying time of the
tour at each preset point.
Click it to save current setup./ Refresh current interface.
Description
Choose scan No. from drop down list to set./ Set scan speed here. /Stop scanning. / Click set
button, you can set left limit and right limit.
Set camera left limit./ Set camera right limit.
15
Advertisement
Table of Contents
