Table of Contents
Advertisement
User Manual of Explosion-Proof PTZ Camera
2. Check the Enable checkbox to enable the video loss detection.
3. Click
schedule configuration is the same as the setting of the arming schedule for motion
detection. Refer to Section 5.2.1 Configuring Motion Detection.
4. Click
surveillance center, send email and trigger alarm output are selectable. Refer to Section
5.2.1 Configuring Motion Detection.
5. Click
5.2.4 Configuring Alarm Input
Steps:
1. Enter the Alarm Input settings interface:
Configuration > Event > Basic Event > Alarm Input
2. Choose the Alarm Input No. and the Alarm Type. The alarm type can be NO (Normally Open)
and NC (Normally Closed).
3. Edit the name in
alarm input (optional).
Figure 5-16 Video Loss
tab to enter the arming schedule setting interface. The arming
tab to select the linkage method taken for the video loss alarm, notify
to save the settings.
42
to set a name for the
Advertisement
Table of Contents
