Dynamic Ip Connection - Honeywell HEIPTZ-2736-WI User Manual

Explosion-proof
Hide thumbs Also See for HEIPTZ-2736-WI:
Table of Contents

Advertisement

User Manual of Explosion-Proof PTZ Camera
Network
Positioning System
Figure 2-5 Accessing the Explosion-Proof PTZ Camera with Static IP Directly

2.2.2 Dynamic IP Connection

Before you start:
Apply a dynamic IP from an ISP. With the dynamic IP address, you can connect the
Explosion-Proof PTZ Camera to a modem or a router.
Connecting the Explosion-Proof PTZ Camera via a router
Steps:
1. Connect the Explosion-Proof PTZ Camera to the router.
2. In the Explosion-Proof PTZ Camera, assign a LAN IP address, the subnet mask and the
gateway. Refer to Section 2.1.2 for detailed LAN configuration.
3. In the router, set the PPPoE user name, password and confirm the password.
For your privacy and to better protect your system against security risks, we strongly
recommend the use of strong passwords for all functions and network devices. The
password should be something of your own choosing (using a minimum of 8 characters,
including upper case letters, lower case letters, numbers and special characters) in order
to increase the security of your product.
Proper configuration of all passwords and other security settings is the responsibility of
the installer and/or end-user.
4. Set port mapping. E.g. 80, 8000 and 554 ports. The steps for port mapping vary depending on
different routers. Call the router manufacturer for assistance with port mapping.
5. Apply a domain name from a domain name provider.
6. Configure the DDNS settings in the setting interface of the router.
7. Visit the Explosion-Proof PTZ Camera via the applied domain name.
Connecting the Explosion-Proof PTZ Camera via a modem
Purpose:
This Explosion-Proof PTZ Camera supports the PPPoE auto dial-up function. The Explosion-Proof
PTZ Camera gets a public IP address by ADSL dial-up after the Explosion-Proof PTZ Camera is
connected to a modem. You need to configure the PPPoE parameters of the Explosion-Proof PTZ
Camera. Refer to Section 6.1.1 Configuring PPPoE Settings for detailed configuration.
Network
Network
Cable
Cable
Internet
PC
8

Advertisement

Table of Contents
loading

Table of Contents