Table of Contents
Advertisement
User Manual of Explosion-Proof PTZ Camera
Configuration> Advanced Configuration> System > RS-232
2. Configure the Baud Rate, Data Bit, Stop Bit, Parity, Flow Control, and Usage.
If you want to connect the Explosion-Proof PTZ Camera through RS-232 port, the parameters
of the RS-232 should be exactly the same with the parameters you configured here.
3. Click
RS-485
Purpose:
The RS-485 serial port is used to control the PTZ of the Explosion-Proof PTZ Camera. The
configuring of the PTZ parameters should be done before you control the PTZ unit.
RS-485 function varies depending on different Explosion-Proof PTZ Camera models.
Steps:
1. Enter RS-485 Port Setting interface:
Configuration> Advanced Configuration> System > RS-485
2. Set the RS-485 parameters and click
The Baud rate, PTZ Protocol and PTZ Address parameters of the Explosion-Proof PTZ Camera
Figure 6-47 RS-232 Settings
to save the settings.
Figure 6-48 RS-485 Settings
to save the settings.
94
Advertisement
Table of Contents
