Table of Contents
Advertisement
User Manual of Explosion-Proof PTZ Camera
Add an IP Address
Steps:
(1) Click Add to add an IP.
(2) Input the IP Adreess.
(3) Click OK to finish adding.
Modify an IP Address
Steps:
(1) Left-click an IP address from filter list and click Modify.
(2) Modify the IP address in the text filed.
(3) Click OK to finish modifying.
Delete an IP Address
Left-click an IP address from filter list and click Delete.
Delete all IP Addresses
Click Clear to delete all the IP addresses.
5. Click
Configure Security Service Settings
Steps:
1.
Enter the Security Service interface:
Configuration> System > Security > Security Service
2.
Check the checkbox to enable the Illegal Login Lock function.
Illegal Login Lock: Enabling illegal login lock function is to automatically lock the device IP
after the admin user performing 7 failed password attempts (5 attempts for the
user/operator).
3.
Click
Figure 6-53 Add an IP
Figure 6-54 Modify an IP
to save the settings.
to save the settings.
99
Advertisement
Table of Contents
