Table of Contents
Advertisement
User Manual of Explosion-Proof PTZ Camera
1.
Enter the Initial Position configuration interface:
Configuration > PTZ > Initial Position
2.
Click the PTZ control buttons to find a position as the initial position of the Explosion-Proof
PTZ Camera; you can also call a defined preset and set it as the initial position of the
Explosion-Proof PTZ Camera.
3.
Click Set to save the position.
Call/delete an Initial Position:
You can click
to call the initial position. You can click
restore the factory default initial position.
5.4.4 Configuring Park Actions
Purpose:
This feature allows the Explosion-Proof PTZ Camera to start a predefined park action (scan, preset,
pattern and etc.) automatically after a period of inactivity (park time).
Scheduled Tasks function is prior to Park Action function. When these two functions are set
at the same time, only the Scheduled Tasks function takes effect.
Park function varies depending on different Explosion-Proof PTZ Camera models.
Steps:
1. Enter the Park Action settings interface:
Configuration > PTZ > Park Action
Figure 5-29 PTZ Configuration
to delete the initial position and
56
Advertisement
Table of Contents
