Table of Contents
Advertisement
User Manual of Explosion-Proof PTZ Camera
6. Click
6.2 Configuring Video and Audio Settings
6.2.1 Configuring Video Settings
Steps:
1. Enter the Video settings interface:
Configuration > Video/Audio > Video
2. Select the Stream Type of the Explosion-Proof PTZ Camera to main stream (normal),
sub-stream or third stream. The main stream is usually for recording and live viewing with
good bandwidth, and the sub-stream can be used for live viewing when the bandwidth is
limited. Refer to the Section 4.2 Configuring Local Parameters for switching the main stream
and sub-stream for live viewing.
3. You can customize the following parameters for the selected stream.
The parameters vary depending on different Explosion-Proof PTZ Camera models.
Video Type:
Select the stream type to video stream, or video & audio composite stream. The audio signal
will be recorded only when the Video Type is Video & Audio.
Resolution:
Select the resolution of the video output.
Bitrate Type:
Select the bitrate type to constant or variable.
to save the settings
Figure 6-19 Configure Video Settings
77
Advertisement
Table of Contents
