Table of Contents
Advertisement
User Manual of Explosion-Proof PTZ Camera
Before connecting the Explosion-Proof PTZ Camera to the protected LAN, apply a digital
certificate from a Certificate Authority.
The Explosion-Proof PTZ Camera requests access to the protected LAN via the
authenticator (a switch).
The switch forwards the identity and password to the authentication server (RADIUS
server).
The switch forwards the certificate of authentication server to the Explosion-Proof PTZ
Camera.
If all the information is validated, the switch allows the network access to the protected
network.
For your privacy and to better protect your system against security risks, we strongly
recommend the use of strong passwords for all functions and network devices. The password
should be something of your own choosing (using a minimum of 8 characters, including
upper case letters, lower case letters, numbers and special characters) in order to increase
the security of your product.
Proper configuration of all passwords and other security settings is the responsibility of the
installer and/or end-user.
Steps:
1.
Connect the Explosion-Proof PTZ Camera to your PC directly with a network cable.
2.
Enter the 802.1X settings interface:
Configuration > Network > Advanced Settings > 802.1X
Figure 6-16 Protected LAN
Figure 6-17 802.1X Settings
75
Advertisement
Table of Contents
