User Manual of Explosion-Proof PTZ Camera
5.2.6 Handling Exception
The exception type can be HDD full, HDD error, network disconnected, IP address conflicted and
illegal login to the Explosion-Proof PTZ Camera.
Steps:
1.
Enter the Exception settings interface:
Configuration > Event > Basic Event > Exception
2. Check the checkbox to set the actions taken for the Exception alarm. Refer to Section 5.2.1
Configuring Motion Detection.
3.
Click
5.3 Smart Event Configuration
The functions vary depending on different Explosion-Proof PTZ Camera models.
Figure 5-20 Exception Settings
to save the settings.
45