Dynamic Ip - Honeywell HISD-1181W Operation Manual

Setup steps:
1. Log in IP camera via the IE browser (the default IP is 192.168.55.160).
2. Switch to the page network settings, fill in the device IP address assigned by
network administrator in to Basic Parameters, e.g. 192.168.55.160.
3. Fill in subnet mask, default value is 255.255.255.0.
4. Fill in gateway address, default value is 255.255.255.0.
Click Save to save the parameters. Start the device, enter its IP address into IE browser to
visit it.

Dynamic IP

Dynamic IP means that IP camera obtains IP address from DHCP server. See below picture
for the network topology:
Please refer to below picture for the network settings:
Honeywell
49