Specifying Forwarding Settings
The Remote UI enables you to specify the forwarding conditions for forwarding
received documents.
IMPORTANT
2
•
This function is available only in the following cases:
- When the Universal Send Expansion Board-A1 (optional) is installed in the iR105,
- When the iR6020i/5020i is used.
- When the Image Reader-A1 (optional) is installed in the iR6000i/5000i.
- When the Image Reader-B1 (optional) is installed in the iR3300i/2200i.
•
This section uses screenshots of the iR5020i as examples.
NOTE
•
The forwarding settings available using the Remote UI are the same as those that you
can access from the control panel of the machine by pressing
© [System Settings] © [Forwarding Settings]. For instructions on using the control panel
to specify forwarding settings and more information on forwarding settings, see Chapter
4, "System Manager Settings," in the Reference Guide.
•
For a detailed explanation of the forwarding settings, see Chapter 4, "System Manager
Settings," in the Reference Guide.
2-94
Specifying Forwarding Settings
iR8500, and iR7200.
(Additional Functions)