Before You Start The Remote Ui - Canon imageRUNNER 105 Function Manual

Before You Start the Remote UI

Before you start the Remote UI, perform the following:
1
I Specify the Network Settings
Specify the settings under Network Settings in System Settings (from the Additional
Functions screen) and find out the machine's IP address. If you do not know the
machine's IP address, consult your network administrator. (See Chapter 3, "Using a TCP/
IP Network," in the Network Guide.)
I MEAP Settings (Only for models equipped with MEAP)
Set Use HTTP in MEAP Settings in System Settings (from the Additional Functions
screen) to 'On'. (See Chapter 4, "System Manager Settings," in the Reference Guide.)
I Set Remote UI to On
Set Remote UI in System Settings (from the Additional Functions screen) to 'On'. It is also
recommended that Device Information Settings in System Settings be set up.
I Install the JBIG Image Viewer
To display the documents stored in a mail box, it is necessary to install the JBIG Image
Viewer. To install and use the JBIG Image Viewer, see the \Jbig\readme.txt file on the
CD-ROM provided.
IMPORTANT
•
Connection via a proxy server is not possible. If your system environment has a proxy
server, perform the following setting. (Settings vary according to the system environment,
consult your network administrator.)
- Enter the IP address of the machine into Exceptions in the web browser proxy server
- You must set your web browser to enable all cookies and use Java Script. Otherwise,
•
If the control panel of the machine is being used for a particular operation, you cannot
perform the same operation using the Remote UI.
•
If multiple Remote UIs are running simultaneously, the latest setting that was made is
enabled. It is recommended that only one Remote UI be running at a time.
•
To enter characters from a web browser, use the characters that you can enter from the
touch panel display of the machine. If you use the other characters, they may not be
displayed/recognized properly on the machine.
1-10

Before You Start the Remote UI

settings.
you will not be able to change the machine's settings using the Remote UI.