Starting The Remote Ui; Models Not Equipped With Meap - Canon imageRUNNER 105 Function Manual

Starting the Remote UI

To start the Remote UI, follow the procedure described below.

Models Not Equipped with MEAP

For the models that are not equipped with MEAP (Multifunction Embedded
Application Platform), follow the procedure below.
1
Start your web browser.
2
Enter the appropriate URL into [Address] or [Location].
http://<the IP address of the device>/
The Remote UI screen is displayed.
NOTE
If you do not know the appropriate URL, consult your system administrator.

Starting the Remote UI

1
1-15