Specifying Ldap Server Settings - Canon imageRUNNER 105 Function Manual

Specifying LDAP Server Settings

The Remote UI enables you to store and edit the LDAP (Lightweight Directory
Access Protocol) server settings. If the LDAP server information is stored, the
machine can access the LDAP server on the network to search and obtain
addresses when you are storing or specifying addresses.
2
IMPORTANT
•
This function is available only in the following cases:
- When the iR6020i/5020i is used.
•
This section uses screenshots of the iR5020i as examples.
NOTE
The LDAP server settings available using the Remote UI are the same as those that you
can access from the control panel of the machine by pressing
© [System Settings] © [Register LDAP Server]. For instructions on using the control
panel to specify LDAP settings, see Chapter 4, "System Manager Settings," in the
Reference Guide.
2-90

Specifying LDAP Server Settings

(Additional Functions)