E9C
Checks to perform:
Replace the circuit board and repeat the diagnostic cycle to check for any further alarms.
E9E
Checks to perform:
Replace the display board and repeat the diagnostic cycle to check for any further alarms.
2011 SOE/DT-mdm FCPD-dp Quality-tb
Guide to diagnostics of electronic controls EWM10931
E9C: Display board configuration error
Incorrect configuration possible.
E9E: Display board sensor/touch key faulty
Display board faulty.
!
Check that all the connectors are correctly inserted
!
Check that all the connectors are correctly inserted
!
63/75
E9C
E9E
If there are burns on the circuit
board, see page 73
599 73 77-37