1. Manuals
  2. Brands
  3. Electrolux Manuals
  4. Washer
  5. EWM 1000 AEG
  6. Service manual

Electrolux EWM 1000 AEG Service Manual

Toploader
Hide thumbs
Table of Contents

Advertisement

Quick Links

© Electrolux Distriparts
Muggenhofer Straße 135
D-90429 Nürnberg
Germany
Fax +49 (0)911 323 1022
DGS-TDS-N
11.06
Edition
Publ.-Nr.:
599 51 50 25
685
EN

SERVICE MANUAL

WASHING
Washing machines,
Toploader
EWM 1000
AEG

Advertisement

Table of Contents
loading

Related Manuals for Electrolux EWM 1000 AEG

Summary of Contents for Electrolux EWM 1000 AEG

  • Page 1: Service Manual

    SERVICE MANUAL WASHING Washing machines, Toploader © Electrolux Distriparts Publ.-Nr.: EWM 1000 Muggenhofer Straße 135 599 51 50 25 D-90429 Nürnberg Germany Fax +49 (0)911 323 1022 DGS-TDS-N 11.06 Edition...

  • Page 2: Table Of Contents

    Function of the FUCS ....................19 Foam Detection ......................21 Accessibility of Components ..................22 Service Program ......................23 Demo-Programm ......................30 Circuit Diagram ......................31 Changes ........................40 - 2 - DGS-TDS-N 11.06 R.B. © Electrolux 599 51 50 25...

  • Page 3: Control Panel

    This is available in the programmes cotton/colored, easy-care, delicate fabrics and energy- programmes. Can't be combined with the “stains” button. It is heated up to max. 30 ° C. - 3 - DGS-TDS-N 11.06 R.B. © Electrolux 599 51 50 25...
  • Page 4 One additional rinse cycle Additional loosening phase after spin-drying Energy-programmes Function: Wash temperature is reduced to 60°C and wash time is prolonged. Can be combined with the keys “Prewash” and “Stains”. - 4 - DGS-TDS-N 11.06 R.B. © Electrolux 599 51 50 25...
  • Page 5 Press simultaneously key 1 and key 3, turn the programme selector one position to the right. Keep the keys pressed until the LED Rinse+ goes dark on the programme flow display. - 5 - DGS-TDS-N 11.06 R.B. © Electrolux 599 51 50 25...

  • Page 6: Functions Of The System

    Functions of the System Electronic module Door lock pressure switch Drain pump Termistance Inlet valve Motor Heating element DSP (Drum Self Position) - 6 - DGS-TDS-N 11.06 R.B. © Electrolux 599 51 50 25...

  • Page 7: Electronic Module

    In case of a power failure the module saves the just paused cycle. When the power supply to the appliance is restored again, the cycle starts where the program was paused. - 7 - DGS-TDS-N 11.06 R.B. © Electrolux 599 51 50 25...

  • Page 8: Door Lock

    If there is a power failure during a wash cycle, the door lock requires approx. 2 min until the lid can be opened. During this time the PTC bimetal cools down and the locking part opens. Circuit Diagram Security: (see page Service - Program fault display E40) - 8 - DGS-TDS-N 11.06 R.B. © Electrolux 599 51 50 25...

  • Page 9: Dsp (Drum-Self-Position)

    The LED drum positioned is not illuminated. At the end of the cycle the positioning phase is 2 min until time out is reached. - 9 - DGS-TDS-N 11.06 R.B. © Electrolux 599 51 50 25...

  • Page 10: Water Inlet Valve For 3- And 4-Chamber Detergent Box

    It is not possible to select both options prewash and bleaching at the same time. The flushing into the main wash chamber goes via hose 2. The simultaneous filling through hoses 2 and 4 provides the fill-in through the softener chamber. - 10 - DGS-TDS-N 11.06 R.B. © Electrolux 599 51 50 25...

  • Page 11: Water Distributor

    Water Distributor Main wash Bleach Pre wash Softener Pre wash Main wash Water inlet valve 1 Bleach Softener Water inlet valve 2 - 11 - DGS-TDS-N 11.06 R.B. © Electrolux 599 51 50 25...
  • Page 12 Filling period is determined by control electronics. Calculation of filling quantity is by measuring time interval between fTR contact closing and the closing of pressure switch fN contact. - 12 - DGS-TDS-N 11.06 R.B. © Electrolux 599 51 50 25...

  • Page 13: Heating Element

    For security reasons, 2 switching contacts of the pressure switch are connected in series. The switching positions are monitored by control electronics via 2 control lines. - 13 - DGS-TDS-N 11.06 R.B. © Electrolux 599 51 50 25...

  • Page 14: Heating Circuit

    The μP will be break off if an anomaly on the termistance circuit is detected : cut or short-circuit. (see Page Service-Program fault display E70) The heating phase is not executed. - 14 - DGS-TDS-N 11.06 R.B. © Electrolux 599 51 50 25...

  • Page 15: Drain Pump

    After a break of 20 minutes, the fifth and last trial is started. If the motor does not run this time, the programme is aborted. (see Page Service-Program fault display E60) - 15 - DGS-TDS-N 11.06 R.B. © Electrolux 599 51 50 25...

  • Page 16: Drum Movements

    Drum movements Sek. 1/Min. N 55 Sek. 1/Min. E 55 Sek. 1/Min. E 55 Sek. 1/Min. PWL_1 Sek. 1/Min. PWL_4 Sek. 1/Min. - 16 - DGS-TDS-N 11.06 R.B. © Electrolux 599 51 50 25...

  • Page 17: Spinning Profiles

    1/Min. Sek. FUCS nein FUCS imp nein FUCS nein 1000 nein 1150 nein 1400 nein SYN_CF 1/Min. Sek. FUCS nein FUCS imp nein FUCS nein nein nein nein - 17 - DGS-TDS-N 11.06 R.B. © Electrolux 599 51 50 25...
  • Page 18 EASY_IRON_IMP 1/Min. Sek. FUCS nein nein FUCS nein FUCS nein FUCS nein 1/Min. Sek. FUCS nein FUCS imp nein FUCS nein indicates that the anti-foam function is active. - 18 - DGS-TDS-N 11.06 R.B. © Electrolux 599 51 50 25...

  • Page 19: Function Of The Fucs

    650 1/min is carried out. If the speed is not reached, spin-dry is skipped. Perfect balance Reversing FUCS phase 0 with spin-dry pulse Reversing FUCS phase 1 regular spin-dry - 19 - DGS-TDS-N 11.06 R.B. © Electrolux 599 51 50 25...
  • Page 20 Unalancing after the third phase FUCS phase 0 FUCS phase 1 FUCS phase 2 FUCS phase 3 FUCS phase 1 FUCS phase 2 FUCS phase 3 no spin - 20 - DGS-TDS-N 11.06 R.B. © Electrolux 599 51 50 25...

  • Page 21: Foam Detection

    Draining is carried out for 1 minute with the motor at stop. If too much foam is detected during any wash cycle, an additional rinse cycle is added. - 21 - DGS-TDS-N 11.06 R.B. © Electrolux 599 51 50 25...

  • Page 22: Accessibility Of Components

    Besides the main electronic the accessibility of components is to be taken from Service Manual 599 515 011. Replace the main circuit board Remove the control panel. Remove the five fixation screws from the electronic. Disengage cable cover Disconnect all plugs. - 22 - DGS-TDS-N 11.06 R.B. © Electrolux 599 51 50 25...

  • Page 23: Service Program

    Draining and spinning Draining Spinning up to maximium spin speed, if level < fSch The drum is positioned if level < fSch Displaying the error code (programme display) - 23 - DGS-TDS-N 11.06 R.B. © Electrolux 599 51 50 25...
  • Page 24 Safety pressure sw itch on for a time longer than 15 sec. Replace inlet valve Air trap system leaking Replace pressure sw itch Cable pressure sw itch and electronic Replace electronic - 24 - DGS-TDS-N 11.06 R.B. © Electrolux 599 51 50 25...
  • Page 25 Replace pressure sw itch antboil 2 Incongruence betw een antiboil 2 and relay Replace cable Heating element defect Replace pressure sw itch antboil 1 Incongruence betw een antiboil 1 and relay Replace cable - 25 - DGS-TDS-N 11.06 R.B. © Electrolux 599 51 50 25...
  • Page 26 Pow er supply voltage too high Wrong or disturbed pow er supply line Replace electronic Pow er supply voltage too low Wrong or disturbed pow er supply line Replace electronic - 26 - DGS-TDS-N 11.06 R.B. © Electrolux 599 51 50 25...
  • Page 27 Off / On Door locked 2 Program cycle stopped Drain pump is activatedt 3 Heating step is skipped 4 Program canceled 5 DSP-function is skipped 6 after 5 attempt - 27 - DGS-TDS-N 11.06 R.B. © Electrolux 599 51 50 25...
  • Page 28 A with 10 x flashing (LED 65) B with 11 x flashing F with 15 x flashing Operation of alarms during diagnostics All alarms are enabled during the components diagnostics phase. - 28 - DGS-TDS-N 11.06 R.B. © Electrolux 599 51 50 25...
  • Page 29 It is good practice to cancel the last alarm: after reading the alarm code, to check whether the alarm re-occurs during diagnostics after repairing the appliance, to check whether it re-occurs during testing. - 29 - DGS-TDS-N 11.06 R.B. © Electrolux 599 51 50 25...

  • Page 30: Demo-Programm

    Keep buttons 1 and 2 pressed in together and rotate the programme selector two positions to the right. Keep both selected keys pressed for about 2 seconds. Switch Off the appliance to deactivate the demo program. - 30 - DGS-TDS-N 11.06 R.B. © Electrolux 599 51 50 25...

  • Page 31: Circuit Diagram

    Circuit Diagram Technicl Specifications - 31 - DGS-TDS-N 11.06 R.B. © Electrolux 599 51 50 25...
  • Page 32 Circuit Diagram Wiring Diagram - 32 - DGS-TDS-N 11.06 R.B. © Electrolux 599 51 50 25...
  • Page 33 Circuit Diagram Elementary Diagram - 33 - DGS-TDS-N 11.06 R.B. © Electrolux 599 51 50 25...
  • Page 34 ” minutes ‘ VAE time needed to drain the water till “empty” position of anti- boiling (safety heater) pressure switch - 34 - DGS-TDS-N 11.06 R.B. © Electrolux 599 51 50 25...
  • Page 35 26 Movement 8’ Gh†‡Ã…v†r 27 Drain VAE + 14” No Mov †‚s‡rr… 450/650/850/1000/ 28 Drain + spin 9’ COT_CF 1200/1400 rpm 29 Detach movement 1’ Notes: ” ‘ - 35 - DGS-TDS-N 05.04 A.B. © Electrolux 599 51 50 25...
  • Page 36 Refill: P1 †‚s‡rr… 33 Drain VAE + 14” No Mov 34 Drain + spin 4,5’ SYN_CF (max. 900rpm) 35 Detach movement 1’ Not for Economy Notes: ” ‘ - 36 - DGS-TDS-N 05.04 A.B. © Electrolux 599 51 50 25...
  • Page 37 25 Time water fill Qrd2 (*) Gh†‡Ã…v†r 26 Movement 3’ Refill: P1 †‚s‡rr… 27 Drain No Mov 28 Drain + spin 3,8’ DEL_CF (450/700rpm) 29 Detach movement 1’ Notes: ” ‘ - 37 - DGS-TDS-N 05.04 A.B. © Electrolux 599 51 50 25...
  • Page 38 16 Time water fill Qwor2 (*) Pwl_4 Gh†‡Ã…v†r 17 Movement 5’ Refill:P1 †‚s‡rr… 18 Drain VAE+14” No Mov 19 Drain + spin 3,5’ WOOL_CF (max. 1000rpm) Notes: ” ‘ - 38 - DGS-TDS-N 05.04 A.B. © Electrolux 599 51 50 25...
  • Page 39 4 ZRU Normal water intake for the 1st rinse and other rinses 4 ZRU Normal water intake for the final rinse /HYHOV IRU +DQGZDVK 4 ZK Water intake for main wash 10.0 4 ZK Refill main wash - 39 - DGS-TDS-N 05.04 A.B. © Electrolux 599 51 50 25...

  • Page 40: Changes

    Changes Date Page changed 24.11.2006 - 40 - DGS-TDS-N 11.06 R.B. © Electrolux 599 51 50 25...

This manual is also suitable for:

Ewm1000

Table of Contents