4.2 Reading the alarms
The last three alarms stored in the FLASH memory of the PCB can be displayed:
•
Enter the diagnostic mode (para. 3.1)
•
Irrespective of the type of PCB and configuration, turn the programme
selector knob clockwise to the eleventh position the last alarm is displayed.
•
To display previous alarms, press/touch the button/sensor to the left of the
START/PAUSE button in sequence (as shown in the figure)
•
To return to the last alarm, press/touch the START/PAUSE button/sensor.
SERIES 7
2011 SOE/DT-mdm FCPD-dp Quality tb
Guide to diagnostics of electronic controls EWM10931
SERIES 8
11/75
SERIES 9
599 73 77-37