E69: Washing Heating Element Damaged - Electrolux EWM10931 Service Manual

E69
Checks to perform:
Measure the resistance
value of the heating
element (Ω) between
terminals J3-1 ÷ J3-2 of the
wiring connector
-(see fig.4)-
Is the value correct?
(28÷31Ω for 230V/1,750W)
Y
E
S
Replace the circuit board
and repeat the diagnostic
cycle to check for any
further alarms.
Fig. 20
28÷31Ω 230V 1,750W
2011 SOE/DT-mdm FCPD-dp Quality-tb
Guide to diagnostics of electronic controls EWM10931

E69: Washing heating element damaged

Measure the resistance
value directly on the
terminals of the heating
(detach the connectors)
NO
(see fig.20)
Is the value correct?
(28÷31Ω for 230V/1,750W)
Check/replace the wiring and repeat the diagnostic cycle to check
Fig. 4
Washing heating element
!
Check that all the connectors are correctly inserted
element
NO
Y
E
S
for any further alarms.
J16 J1 J1
J10 J1
J1
28÷31Ω 230V 1,750W
!
56/75
Replace the heating
element and repeat the
diagnostic cycle to check
for any further alarms.
J4 J8
J6
J7
J5
J9
J3
J1
MAIN CIRCUIT
BOARD
If there are burns on the circuit
board, see page 73
599 73 77-37
E69