Removing jammed paper
If <CLEAR PAPER JAM> is displayed in the LCD, follow this procedure to clear the paper jam.
If a paper jam occurs when receiving a fax, that fax will be stored in memory and
Fax Model
printed automatically when you clear the jam and press [Resume].
Removing jams in the paper output tray
Follow this procedure to remove jams from the paper output tray:
1
Gently pull any jammed paper out of the
paper output tray.
• If you cannot see any jammed paper in the paper
output tray, remove it from the machine's interior
(
below).
2
Press [Resume].
• If you are printing from a Windows application,
follow the instructions displayed on your computer.
Removing jams from the machine's interior
Follow this procedure to remove jams from the machine's interior:
1
Press [Open] q and lift up the scanning unit
w.
2
Gently gather the jammed paper to the
center of the opening and then remove it.
CAUTION
• Be careful not to touch the components inside
the machine.
• If the jammed paper tears while you are pulling
and you cannot remove the torn pieces, turn the
machine off then on with the [ON/OFF (1 sec.)].
The jammed pieces will automatically be ejected.
3
Close the scanning unit until it locks into place.
4
Press [Resume].
• If you are printing from a Windows application,
follow the instructions displayed on your computer.
10-10
Troubleshooting
w
q
Chapter 10