Canon imageCLASS MP700 Quick Reference Manual page 12

Canon imageclass mp700: reference guide
Hide thumbs Also See for imageCLASS MP700:
Table of Contents

Advertisement

• Do not lift the machine by any of its attachments. Lift it by
the recessed areas on the sides of the machine.
Maintenance
WARNING
• Do not service the machine yourself except as specifically described in this guide. If further
servicing is required, contact your local authorized Canon dealer or the Canon help line.
• Keep the machine clean. Dust accumulation may prevent the machine from operating properly.
For your safety (Australia Only)
To ensure safe operation the three-pin plug supplied must be inserted only into a standard
three-pin power point which is effectively earthed through the normal household wiring.
Extension cords used with the equipment must be three-core and be correctly wired to provide
connection to earth. Wrongly wired extension cords are a major cause of fatalities.
The power point shall be located near the equipment and shall be easily accessible.
The fact that the equipment operates satisfactorily does not imply that the power point is
earthed and the installation is completely safe. For your safety, if in any doubt about the
effective earthing of the power point, consult a qualified electrician.
Caution (New Zealand Only)
1. This equipment may not necessarily provide for the effective hand-over of a call to or from a
telephone connected to the same line.
2. The operation of this equipment on the same line as telephone or other equipment with
audible warning devices or automatic ring detectors will give rise to bell tinkle or noise and
may cause false tripping of the ring detector. Should such problems occur, the user is not to
contact Telecom faults service.
3. Should this equipment become physically damaged, disconnect immediately from the
Telecom connection and power source and contact your nearest service agent.
4. To relocate this equipment please.
1) Disconnect the equipment from the Telecom connection.
2) Disconnect the equipment from the power source.
3) Reconnect the equipment to the power source.
4) Reconnect the equipment to the Telecom connection.
XII
Preface

Advertisement

Table of Contents
loading

This manual is also suitable for:

Imageclass mp730

Table of Contents