Table of Contents
Advertisement
B O R D E R L E S S P R I N T
16
Use [2 2
2 ] or [3 3 3
2
• Select:
– <OFF> to print the photograph with a border.
– <ON> to print the photograph without a border.
17
Press [OK].
• Use [2] or [3] to view your settings in the LCD.
S I N G L E F R A M E
P H O T O A 4
18
Press [Start].
NOTE
• Printing is enlarged or reduced automatically according the print media size. Depending on the print
media type and whether borderless printing is selected, the photograph may be cropped.
• A margin may still appear even if you select borderless printing on letter-size print media.
• You can select the width cropped from the borders of the original image ( <EXTENSION AMOUNT>,
User's Guide).
Reading from or writing to a memory card
When your machine is connected to a computer, the memory card drive (Removable Disk) will
appear on your computer's [My Computer].
By inserting a memory card in the machine, you can view photographs on the memory card by
opening the [Removable Disk] on your computer. You can then copy the photographs to your
computer's hard disk (similar to copying other files on the hard disk), or by changing the setting,
can copy hard disk files onto the memory card.
IMPORTANT
• Do not put your computer in standby or sleep mode when a memory card is inserted in a card slot.
Also, do not remove or switch memory cards when your computer is in standby or sleep mode.
• Insert only one memory card at a time into the machine.
• When switching between memory cards of the same type or inserting a memory card into a
different card slot, press [ON/OFF (1 sec.)] to turn off the power before removing the card. Once
removed, press [ON/OFF (1 sec.)] again to turn on the power before inserting the other memory
card.
• In Windows 2000, if you turn off the machine, the [Unsafe Removal of Device] screen will be displayed. In
this case, click [OK]. This will not affect your machine or computer's operation.
• If you insert memory cards into both slots, the compact flash card will be recognized.
Enabling/disabling overwriting memory card data
You can enable or disable overwriting memory card data. This setting is initially set to disable
overwriting.
Follow this procedure to change the setting:
1
Make sure there is no memory card inserted in the machine.
2
Press [Menu].
Chapter 4
O F F
3 ] to select borderless printing.
or
Photo printing from a memory card —Basic operation
S I N G L E F R A M E
N O . 0 0 0 2
0 1
4-9
4
Advertisement
Table of Contents
