3
Use [2 2
2
2 ] or [3 3 3
4
Press [OK].
U S E R D A T A
1 . T E L R E G I S T R A T I O N
5
2
2 ] or [3 3 3
Use [2 2
6
Press [OK].
7
Use [2 2
2
2 ] or [3 3 3
8
Press [OK].
C A R D P R O T E C T
9
2
2 ] or [3 3 3
Use [2 2
10
Press [OK].
11
Press [Stop/Reset] to return to standby mode.
12
Press [Copy], [Fax], or [Scan] to select a mode other than photo print mode.
• To avoid damage to data being accessed on a memory card, you cannot overwrite in photo print
mode.
13
Insert a memory card into the appropriate slot.
IMPORTANT
• If you change the above setting while a memory card is inserted in a card slot, turn the machine off
then on again. The new setting will not be activated until you do so.
More information
For detailed information on all photo printing features, refer to the User's Guide.
4-10
Photo printing from a memory card —Basic operation
3 ] to select <USER DATA>.
3 ] to select <SYSTEM SETTINGS>.
3 ] to select <CARD PROTECT>.
O N
3 ] to select <ON> to disable overwriting or <OFF> to enable overwriting.
Chapter 4