Table of Contents
Advertisement
Name
4. RX SETTINGS
1. ECM RX*
2. FAX/TEL AUTO SW
1. RING START TIME Selects the time the machine takes to check whether a
2. F/T RING TIME
3. DEFAULT
ACTION
3. INCOMING RING
RING COUNT
4. MAN/AUTO
SWITCH
F/T RING TIME
5. REMOTE RX
REMOTE RX ID
6. RX REDUCTION
REDUCE
DIMENSION
7. RX START SPEED
3. PRINTER SETTINGS
1. QUIET MODE
2. EXTENSION AMOUNT For borderless printing or copying, selects the width
* ECM stands for Error Correction Mode. Resends image data that was lost due to phone line interference so there-
by making sent and received images seamless.
**<NET SWITCH> is only available in Australia and New Zealand.
***New Zealand : 1 to 5.
Chapter 11
Description
—
Enables/disables Error Correction Mode (ECM) during
reception.
If you select <FAX/TEL AUTO SW> as the receive mode,
customizes its settings.
call is a fax or voice call.
Selects the ring length for voice calls.
Selects whether the machine switches to receive mode
after the ring time has elapsed, or whether it
disconnects the call.
If you select <FAX ONLY MODE>, <NET SWITCH>**, or
<FAX/TEL AUTO SW> as the receive mode, enables/
disables ringing for fax calls. (A telephone must be
connected to your machine for ringing to occur.)
If you select <ON>, selects the number of rings for fax
calls.
If you select <MANUAL MODE> as the receive mode,
selects if the machine switches to fax receive mode after
ringing for a specified length of time.
If you select <ON>, selects the length of time the
machine rings before switching to fax receive mode.
Enables/disables remote receiving.
If you select <ON>, selects the remote receiving ID.
Enables/disables automatic reduction of faxes to fit the
paper loaded.
Selects the direction of the reduction.
Selects the speed at which the machine starts receiving. 33600bps
—
Enables/disables quiet printing mode.
cropped from the borders of the original image.
Setting
Details
—
ON
OFF
—
UG
8 SEC (0 to 30)
22 SEC (10 to 60) UG
RECEIVE
DISCONNECT
OFF
ON
2 TIMES
(1 to 99)***
OFF
ON
15 SEC (5 to 99)
ON
OFF
25 (00 to 99)
ON
OFF
VERTICAL ONLY
HORIZ & VERTICAL
14400bps
9600bps
7200bps
4800bps
2400bps
—
OFF
ON
SMALL
LARGE
Machine settings
11
11-5
Advertisement
Table of Contents
