Viewing The Toolbar - Canon MultiPASS F20 Software User's Manual

•
•
•
•
•
•
•

Viewing the Toolbar

If the Toolbar does not automatically open, you will need to open it when
necessary. Under certain circumstances, you may be required to close the
Toolbar (for example, when removing the software). The display of the
Toolbar can also be minimized or maximized on the Windows taskbar or
desktop.
Chapter 4
Scan from
Displays where the original scanned image is set.
When Scanner Push Button Pressed
Click the desired action that occurs when you push the scan
button on your printer. For example, you can set the button to
display the Toolbar, or to send the scanned document to a
particular destination, such as E-mail.
Show scanner driver Before Scanning
Click to display the scanner window or dialog box before
scanning an image. In the window or dialog box, you can select
the desired scan options.
If this option is cleared, the image is scanned based on the scan
settings defined in the Toolbar.
Toolbar Always on Top
Click to keep the Toolbar displayed on top of all applications that
may appear on the Windows desktop.
Load on Windows Startup
Click to open the Toolbar when Windows is started. If this setting
is cleared, you need to open the Toolbar when you want to use it.
Button Size
Click your preferred display size for the Toolbar buttons.
Select driver type
If you use Windows XP, choose whether you will use ScanGear
driver (TWAIN-compliant driver) or the WIA driver for
scanning.
6
Scanning 86