Canon MultiPASS F20 Software User's Manual page 97

•
•
•
•
•
•
To change the print setup (Viewer):
1. On the File menu, click Print Setup.
Chapter 5
Click, or type, the margins you want to use along the edge of the
paper.
If the one or more thumbnail images do not fill the page, click the
position where the thumbnails should be printed.
Click the size you want to use for the thumbnails. To keep the
width and height properly proportioned, click Maintain Aspect
Ratio. Then, enter the appropriate width or height.
Click other information you may want shown on the printed
document.
Click the preferred resolution for the printed document.
Generally, the higher the resolution, the higher the print quality.
However, print speed may be slower.
Click if you want to correct the image's brightness and contrast
(gamma). Then, specify the gamma value. Generally, the higher
the value, the higher the correction to produce a more subtle
brightness and contrast.
Viewing and Enhancing Images 93