Canon MultiPASS F20 Software User's Manual page 136

8. Is the printer recognized in the Scanners and Cameras Windows
Control Panel (XP only)?
1. On the Windows desktop, click Start, then Control Panel.
2. In the Control Panel window, click Printers and Other Hardware,
3. If Canon MultiPASS F20 scanner is present, the printer is
Computer has hung up or frozen.
1. Quit other open applications and try again.
2. Does the hard disk have enough available space?
3. If an error occurs when scanning an image in Photoshop
4. Remove the MultiPASS Suite software and reinstall.
Chapter 7
Follow this procedure to check if Canon MultiPASS is in Scanners
and Cameras.
then Scanners and Cameras.
recognized. If not, remove the MultiPASS Suite and reinstall.
Memory may be insufficient. Quit other open applications and try
again.
Check that hard disk has enough available space, in particular
when scanning large documents at a high resolution. For
example, a letter-size document scanned at 600 dpi, full color
requires a minimum of 300 MB of space.
Change the allocated memory. On the Edit menu, point to
References, then click Memory & Image Cache. Change the
Physical Memory Usage to 10% or 20%.
Troubleshooting 132
6