Canon MultiPASS F20 Software User's Manual page 91

To open the Toolbar:
On the Windows desktop, click Start, point to Programs or All Programs,
point to MultiPASS Suite, and then click MultiPASS Toolbar. Or, double-
click the MultiPASS Toolbar icon on the Windows desktop.
To close the Toolbar:
On the Windows taskbar, right-click the Toolbar icon. On the displayed
menu, click Exit MultiPASS Toolbar.
To minimize the Toolbar open on the desktop:
On the Toolbar, click the Close button on the title bar.
To maximize the Toolbar from an icon on the taskbar:
Double-click the Toolbar icon.
As an alternative for performing some of the tasks described for the
Toolbar (such as scanning to a particular destination), you can use the
Toolbar menus. To do so: On the Windows taskbar, click or right-click the
Toolbar icon. On the displayed menu, click the desired command.
Chapter 4 Scanning 87