Canon MultiPASS F20 Software User's Manual page 133

You have followed the procedures above and the memory
card is still not recognized.
1. Try again with another memory card.
1. Try with another memory card and if you do not experience a
2. If you still have a problem with another memory card, the PC
Cannot write to the memory card (write protect error
displayed in Windows).
1. Is the printer in photo print mode and card protection set to <ON>?
2. If a delayed write failed error is displayed in Windows 2000
Chapter 7
problem, the first memory card may be damaged. In this case,
reformat the memory card with the digital camera.
When you reformat the memory card with the digital camera, all
the data on the memory card will be deleted. If you can read
image data on the computer, reformat the memory card after you
have backed up the image data.
card adapter may be defective, or the card is having difficulties
operating with the printer. Try again with a recommended
memory card and PC card adapter.
Windows 98/ME: Switch to a different mode and set the <CARD
PROTECT> setting to <OFF> (Basic Guide). Then disconnect and
reconnect the USB cable.
Windows 2000/XP: Switch to a different mode and set the
<CARD PROTECT> setting to <OFF> (Basic Guide).
If necessary, disconnect then reconnect the USB cable.
This error appears if you do not disconnect then reconnect the
USB cable after setting <CARD PROTECT> to <ON> or switching
to photo print mode. Disconnect then reconnect the USB cable
after setting <CARD PROTECT> to <ON> or switching to photo
print mode.
Troubleshooting 129
6
6