Jams In The Adf (F50 Model Only) - Canon MultiPASS F30 Reference Manual

Removing the Jammed Paper from the Scanning Unit
1
Turn off the power.
2
Push the Open button and lift up the
scanning unit.

Jams in the ADF (F50 Model Only)

When a document is jammed or misfed in the ADF, the LCD displays DOC.TOO LONG.
• You do not need to turn off the power when you remove the jammed documents from the ADF.
NOTE
1
Press Stop/Reset.
2
If a multipage document is loaded, remove
all document except for jammed page(s)
from the ADF.
6-2
3
Gently gather the jammed paper to the
center of the opening, and then remove it.
• Be careful not to touch the components
CAUTION
inside the machine.
4
Close the scanning unit and turn on the
power.
5
Press Resume to start the operation again.
• If you are printing from a Windows
follow the instructions displayed by the software
on your PC.
3
Open the feeder cover.
® application,