Loading Documents into the ADF (F50 Model Only)
1
Make sure there is no document on the
platen glass.
2
Fan the edge that will feed into the
machine first then, tap the edge of
multipage documents on a flat surface to
even the stack.
3
Adjust the document guides to the width of
the document.
2-4
4
Gently insert the top of the document, face
up, into the ADF until you hear a beep.
The document is now ready for scanning.
• For a multipage document, the pages are
NOTE
fed one by one from the top of the stack.
• Wait until all pages of your document have
been scanned before starting a new job.