Shrinking An Image To Fit Onto The Paper - Canon MultiPASS F30 Reference Manual

Shrinking an Image to Fit onto the Paper

To copy an original document with an image occupying the entire page onto a page of the same size as the
original, use ENTIRE IMAGE to fit the original image into the required paper size.
• When using legal-size documents with the F30 model, the lowermost section of the document may not
be copied.
NOTE
1
Press Copy to set Copy Mode.
2
Prepare the document and place it on the
platen glass or load it into the ADF. (
2-3, 2-4)
3
To make a black & white copy, make sure
the Color/B&W light is off.
To make a color copy, press Color/B&W
to turn on its light.
4
Set copy features if you wish. You can set
the features below.
• Copy quantity (
• Paper size and paper type (
• Image quality (
• Exposure (
• Please note that you cannot change settings
during copying.
NOTE
5
Press Menu.
M E N U
1 . S P E C I A L C O P Y
4-8
p. 4-2)
p. 4-2)
p. 4-4)
p. 4-4)
6
Press Set.
S P E C I A L C O P Y
1 . I M A G E R E P E A T
pp.
Use F or E to select ENTIRE IMAGE.
7
S P E C I A L C O P Y
3 . E N T I R E I M A G E
8
Press Set.
9 0 %
E N T I R E I M A G E
Ex:
• When enlarging/reducing is set in
conjunction with ENTIRE IMAGE, only
NOTE
copy ratios less than 101% can be used.
9
Press Start to begin copying.
When the machine finishes copying, it beeps.
L T R T E X T
01