Power Supply - Canon MultiPASS F30 Reference Manual

I Power Supply
• Do not damage or modify the power cord and power plug. Also do
WARNING
not place heavy objects on the power cord, pull on it, or extensively
bend it. These actions may cause electrical damage and result in a
fire or electrical shock.
• Do not insert or unplug the power plug with wet hands, as this may
result in electrical shock.
• During electrical storms, turn off the power and disconnect the
CAUTION
power cord from the power outlet. (Please note that any documents
stored in the machine's memory will be deleted when you turn off
the power.)
• If dust accumulates around the plug of the power cord when it is
connected to a power outlet, unplug the machine and wipe the plug with
IMPORTANT
a clean, dry cloth.
• For using the F50 model, do not plug the machine into the same circuit
with appliances such as an air conditioner, television, or copier. These
devices generate an electrical noise, and this may interfere with your
machine's ability.
• Whenever you turn off the power and unplug the machine, wait at least
five seconds before you plug it in again.
• Plug the machine into a standard 120V AC/60Hz, three-prong grounded outlet. Operate the machine only
from the type of power source indicated on the machine's label. If you are not sure of the type of power
available, consult your local power company.
• Use only the power cord that came with the machine.
• Turn off the power and unplug the machine in the following conditions:
- When the power cord or plug is damaged or frayed.
- If liquid has spilled into the machine.
- If the machine has been exposed to rain or water.
- If the machine does not operate normally when you have followed the instructions in the guides included
with your machine. Adjust only those controls that are covered by the instructions in the guides since
improper adjustment of other controls may result in damage and will often require extensive work by a
qualified technician to restore the product to normal operation.
- If the machine has been dropped or damaged.
- If the machine exhibits a distinct change in performance, indicating a need for servicing.
1-2