Copying Problems - Canon MultiPASS F30 Reference Manual

Envelopes do not feed correctly.
Envelopes may not be loaded correctly.
• Make sure the envelopes are loaded properly (→ p. 3-5). Do not load more than 10 envelopes in the multi-
purpose tray.
• Perform roller cleaning. (→ p. 5-3)
The envelopes you are using may not meet the requirements for the machine.
• Envelopes must be U.S. Commercial No. 10 or European DL envelopes. (→ p. 3-1)
• For additional troubleshooting, → MultiPASS Suite User's Guide.
NOTE

Copying Problems

The machine will not make a copy.
One or more Ink Tanks in the installed Printhead (Cartridge) may be empty.
• Check for an error message in the LCD (→ p. 6-4) and replace if necessary. (→ p. 5-6)
The document may not have been loaded correctly.
• Remove the document, stack it if necessary, and place it on the platen glass or load it into the ADF correctly.
(→ p. 2-3)
• Make sure the feeder cover is closed.
The Printhead (Cartridge) or Ink Tanks may not be installed properly.
• Make sure the Printhead (Cartridge) and Ink Tanks are installed properly. (→ Quick Start Guide)
• Be sure to remove the orange protective cap from the Printhead (Cartridge) before you install it. (→ Quick
Start Guide)
The machine may not be operating properly.
• Print the nozzle check pattern. (→ p. 5-8)
MEMORY FULL appears in the LCD when making multiple copies. (F50 model only)
The document you are copying may have too much graphics.
• If multiple pages are being copied, separate the pages into smaller stacks. If not, make the desired number of
copies one at a time as needed.
The machine's memory is full.
• Print or delete any documents stored in memory (→ Fax Guide) to free up space in the machine's memory,
then start again.
• For additional troubleshooting, → Print Quality Problems.
NOTE
6
6-7