Cleaning Inside The Machine - Canon MultiPASS F30 Reference Manual

Cleaning Inside the Machine

To prevent ink spots and paper dust from accumulating inside the machine and affecting print quality, clean
the unit's print area periodically.
1
Turn off the power and disconnect the
power cord from the machine.
2
Push the Open button and lift up the
scanning unit.
ROUND SHAFT
• Do not touch the components shown or
CAUTION
any metal parts since this may adversely
affect operation of the machine and/or
affect print quality.
5-2
RIBBON CABLE
TRANSPARENT FILM
3
Use a clean, soft, dry, lint-free cloth to
remove any ink or paper debris from the
machine's interior (shaded area), especially
around the platen and pinch roller.
• Be careful not to touch the Printhead (Cartridge)
or its holder.
PINCH ROLLER
PLATEN
4
When you are finished, close the scanning
unit.
• Be sure to close the scanning unit until it locks
into place, or the machine will not function
properly.
5
Reconnect the power cord and turn on the
power.