Clearing Paper Jams In The Adf - Canon MultiPASS F50 User Manual

F50 Chapter 6.qxd 06/01/2001
F50 User's Manual
• Place the top of the document flush to the
guide plate.
To load a document in the ADF:
• Lift the document cover to make sure there
are no documents on the glass.
• Adjust the document guide tabs as needed.
• Insert the document(s) in the ADF tray as shown, facing up, until you hear a beep.
The F50 will feed the top page first.
You can load up to 30 letter-size pages of 20 lb.
paper in the ADF at one time, or up to 10 legal-
size pages.
If a paper jam occurs, see below.

Clearing Paper Jams in the ADF

If documents are fed into the ADF (automatic
document feeder) improperly, they can jam.
Jams can also be caused by paper stacked incorrectly in the multi-purpose tray.
To remove a jam from the paper output tray:
Remove paper
1
Gently pull any jammed paper out of the paper output.
Restart operation
2
Press
If you do not see jammed paper in the paper
output, check the scanning unit for a jam.
To remove a jam from the scanning unit:
Shut off power
1
Press the
42
4:08 PM Page 42
Resume
to start the operation again.
ON/OFF
button to turn the F50 off.